How to Fix Scratches and Refinish a Wood Floor?

Insulating and repairing scratches on hardwood floors is also an easier and less expensive option and will help keep your hardwood floors new for years to come. Hardwood floors are beautiful and durable, but they are not resistant to scratches. We have an inexpensive way to remove scratches from wood and repair deep spots in a few easy steps. So today we are going to describe to you some ways to repair scratches on hardwood without breaking your budget.

Clean the scratched spot carefully

Before starting to repair the scratches, the parquet must be thoroughly cleaned on and around the scratch zone. Clean the entire area around the scratch. You must remove all dust and dirt from the floor before starting any other steps. Remove as much dirt as possible with a soft broom and dustpan. Then use a commercially available cleaner suitable for hardwood floors. If you have a wax coating, use a wax remover to remove the wax before starting wood floor refinishing.

Repairing minor scratches: Try DIY solution for small scratches

A most common type of scratching on wood floors can be caused by pets and human fingernails, sand, or hard particles found under shoes. Try DIY Home Solutions first. Mix equal parts apple cider vinegar and olive oil in a small cup and apply the mixture to the stripes. Leave it on for the rest of the day and rub it out. For fine streaks, choose a resin-based stain or a specific ground marker; wax markers are best used for furniture repair. This method often treats minor scratches.

Darken the with blending pencil

Some pencils and crayons are specially designed to fill in the wood strokes that appear as lighter colored spots on the floor. Mix equal parts olive oil and vinegar, which work together to remove dirt, hydrate, and polish the wood. Pour a little directly into the scratch. Let this polish sit for 24 hours and then remove it. Make sure you choose the right color for your floor and try this often-effective treatment for minor scratches. Repeat until the scratch disappears.

Use a finish restorer for light scratches

The finish restorer is designed to help treat faded finishes or minor scratches that spread across most hardwood floors. This restorer can be effective in treating minor scratches, especially if the wood itself has not been damaged.

Repair medium wood scratches

If you have not so big scratches, you can apply a new finish to the area without having to completely buff the floor. If the wood is stained but has no finish, you may be able to achieve similar results when repairing scratches on the floor by re-applying the stain to help hide the scratches. Make sure the result is as close to the original as possible.

If you have lots of scratches, then go for sanding

If the floor has obvious scratches, the best option is to sand and wood floor refinishing. Here are some tips to speed up your work. Thorough sanding will eliminate scratches, but keep in mind that this will only work on real hardwood floors, not bamboo. Use sand with fine steel wool or light sandpaper.

Cover the area with polyurethane or another product originally used on the floor. Use a plastic putty knife to prevent further scratches. Apply a coat of polyurethane with a sheep wool applicator to avoid air pockets in the finish.

Repairing Deep & Superficial Scratches

Clean the deep scratched area. Use a soft cloth and wood floor cleaner to make sure the floor is free of dust or dirt. Rinse cleaner. After cleaning the scratched area, dampen a washcloth with water and wipe off any remaining cleaner. Let dry the area. Complete the stroke. Rub a stick of wax on the scratch to fill it. Use a clean, soft cloth to rub back and forth on the scratched area and rub off the wax. Polishing wax to smooth the scratched area, removes excess wax, and restores shine to the floor.

Refinishing the wood floor

If the entire floor is covered in scratches and scuffs, then go for refinishing. Full sanding removes scratches, but keep in mind that it will only work on real hardwood floors. If you have an engineered wood floor with a real wood surface, make sure it has never been sanded before. This floor can only be sanded once or twice before all the real wood is sanded. It is best to leave the wood floor refinishing process to a professional unless you are comfortable doing it yourself.